Security Instructions - HOLZMANN MASCHINEN MKS 355 Manual De Instrucciones

11.2 Security instructions

Missing or non-readable security stickers have to be replaced immediately!
The locally applicable laws and regulations may specify the minimum age of the
operator and limit the use of this machine!
To avoid malfunction, machine defects and injuries, read the following security instructions!
 Read the manual carefully and get familiar with all components before operating the machine
for the first time.
 This manual contains important information for correct operation of the machine.
 This manual is part of the machine and shall be stored for later reference. Add this manual to
the machine if handed to 3
 Stick to these security warnings and instructions to reduce the risk of serious injuries.
 Assure that the working area is sufficiently lighted!
 Keep your work area dry and tidy! An untidy work area may cause accidents. Avoid slippery
floor.
 Do not overload the machine
 Provide good stability and keep balance all times
 Avoid abnormal working postures! Make sure you stand squarely and keep balance at all times.
 Always stay focused when working. Reduce distortion sources in your working environment.
The operation of the machine when being tired, as well as under the influence of alcohol, drugs
or concentration influencing medicaments is forbidden.
 The plug of an electrical tool must strictly correspond to the socket. Do not use any adapters
together with earthed electric tools
 Each time you work with an electrically operated machine, caution is advised! There is a risk of
electric shock, fire, cutting injury.
 Avoid body contact with earthed
 Protect the machine from dampness (causing a short circuit)
 Use power tools and machines never in the vicinity of flammable liquids and gases (danger of
explosion)
 Check the cable regularly for damage
 When working with the machine outdoors, use extension cables suitable for outdoor use
 Do not use the cable to carry the machine or to fix the work piece
 You will work better and safer at specified power range.
 Use the correct power tool
 Do not use low-power machines for heavy work.
 Do not use the power tool for such purposes for which it was not designed.
 Respectively trained people only and only one person shall operate the machine.
 Do not allow other people, particularly children, to touch the machine or the cable. Keep them
away from your work area.
 Make your workshop childproof.
 Wear suitable work clothes! Do not wear loose clothing or jewelry as they might be caught and
cause severe accidents!
 Wear a hair net if you have long hair.
 Loose objects can become entangled and cause serious injuries!
 Use personal safety equipment: ear protectors, safety goggles, safety gloves, safety shoes when
working with the machine.
 Metal dust may contain chemical substances that have a negative impact on personal health.
Work on the machine only in well-ventilated areas with suitable dust mask perform!
 When working outdoors non-slip footwear is recommended.
 Never leave the machine running unattended! Before leaving the working area switch the
machine off and wait until the machine stops.
 Always disconnect the machine prior to any actions performed at the machine.
 Avoid unintentional starting
 Do not use the machine with damaged switch
 Never use the power cord for transportation or manipulation of the machine!
 Never leave before starting the machine remove any adjusting wrenches and screwdrivers
 Use a clip or clamping jaws to secure the workpiece
 Do not fix the workpiece with your hands
 Rotating parts can cause severe cut injuries
 Keep the saw blades sharp and clean, so they get stuck less often and are easier to guide
 Keep any machine that is not being used out of reach of children
 Do not use the cable to remove the plug from the socket.
HOLZMANN MASCHINEN GmbH
rd persons for use.
www.holzmann-maschinen.at
SAFETY
17
MKS355