HAMPTON BAY BAYWOOD Guía De Uso Y Mantenimiento página 12

Assembly - Attaching the Fan Blades (continued)
2
Attaching the blade brackets
IMPORTANT: Insert the rubber plug (EE) to prevent water from
entering the switch housing and to reduce the risk of fire,
electric shock, or other personal injury.
□
Remove and save the rubber plug (EE) from the switch cup (HH)
to allow screw driver access when attaching blade arms.
□
Fasten the blade bracket (J) to the motor (F) by inserting the
alignment post into the slot on the bottom of the fan-motor
assembly (F) and tightening the motor screws that are pre-
assembled to the blade bracket (J).
□
Repeat for the remaining four blade brackets (J).
□
Insert the rubber plug (EE) into the hole in the switch cup (HH).
Assembly - Attaching the Light Kit
1
Attaching the light kit
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit.
□
Remove the three screws (QQ) from the light kit fitter
assembly (G).
□
Connect the wires exiting the bottom of the motor assembly
(F) by connecting the molded adaptor plugs together (blue to
blue, white to white).
□
Slide the light kit (G) and secure it to the switch housing
using the three screws (QQ) that were removed in the first
step.
F
J
I
EE
QQ
G
11
Please contact 1-855-HD-HAMPTON for further assistance.
HH
HAMPTONBAY.COM