Descargar Imprimir esta página

Price Pfister Pfilter Pfaucet 734 Instrucciones De Montaje

Publicidad

Enlaces rápidos

6A
6
7
Thank you for purchasing this Price Pfister Kitchen Filter Faucet with the built–in
filter by Teledyne Water Pik. Both companies carefully engineer and factory test all
products to provide long trouble–free use under normal conditions. This Kitchen
Faucet is easy to install using basic tools and our easy to follow illustrated
instructions. If you have any questions regarding your Kitchen Faucet installation or
how to replace your Filter call 1–800–Pfaucet (1–800–732–8238).
• For optimum performance of your new Price Pfister Filter Faucet, a minimum
water pressure of 40 PSI is recommended. If your water supply is from a well system,
you can determine your water pressure by checking your water pump specifications. If
you are on city water you may contact your local water company.
• Your replaceable filter cartridge is manufactured by Teledyne Water Pik to provide
you with great tasting drinking water. Do not use with water that is microbiologically
unsafe or unknown quality without adequate disinfection before passing through the
filter.
• For best water quality change filter after every 3 months or 200 gallons.
• In filter mode use cold water only (<100_F, 38_C).
• Use only a Teledyne Water Pik replacement filter.
• Your Filter Faucet is operable with or without a filter installed.
• All Price Pfister aerated faucets comply with the strictest energy standards for wa-
ter conservation, FTC and CSA B125.
• Locate water supply inlets and shut off the water supply valves. These are usually
found under the sink or near the water meter. If you are replacing an existing faucet,
remove the faucet from the sink and clean the sink surface thoroughly. Your installa-
tion may require supply lines and/or shut-off valves. Supply lines not included with
this faucet. Be sure to install in compliance with State and Local building codes.
TOOLS RECOMMENDED
D Pliers
D Flashlight
D Phillips Screwdriver
D Adjustable Wrench
D PTFE Plumbers Tape or Thread Sealant
D Pipe Wrench
24346–0400
1A
1B
1C
1
2
7B
8D
8B
8C
7A
8
1
INSTALLING DECK PLATE
2
3
NSTALLING FAUCET
4
5
2D
3C
2A
3A
2C
2B
3B
3
9A
a
8A
8E
9
6
7
8
1
4A
4B
3D
A
4
9A
For Toll–Free Pfaucet information call 1-800-PFAUCET (1-800-732-8238)
b
D Installation Support
D Care and Warranty Information
Français:
Pour les renseignement concernant le service san frais de
Pfaucet appelez au: 1-800-PFAUCET (1-800-732-8238)
D Aide pour le montage
D Rensignements sur l'entretien et la garantie
Español:
Para obtener información sobre "Pfaucet", llame al número
de llamada gratuita 1-800-PFAUCET (1-800-732-8238)
D Ayuda para la instalación
D Cuidado y Información de la garantia
9
*HOLD STEADY
*MAINTENIR FERMEMENT
*SUJETE FIRMEMENTE
**CAUTION:
5A
**ATTENTION:
**ADVERTENCIA:
B
5B
5F
5C
5E
5
5D
99–1209

Publicidad

loading

Resumen de contenidos para Price Pfister Pfilter Pfaucet 734

  • Página 1 NSTALLING FAUCET • Your Filter Faucet is operable with or without a filter installed. • All Price Pfister aerated faucets comply with the strictest energy standards for wa- ter conservation, FTC and CSA B125. • Locate water supply inlets and shut off the water supply valves. These are usually found under the sink or near the water meter.
  • Página 2 Français: • • Español: a. EL USO DEL AEREADOR b. PRECONDICIONAMIENTO DEL CARTUCHO DE FILTRACIÓN • • • • • • • • A Líneas de suministro flexible (NO INCLUIDAS) 24346–0400 99–1209...
  • Página 3 Español: NO TAG NO TAG Français: Entretien des Garnitures DRINKING WATER SYSTEMS COMPONENTS DRINKING WATER SYSTEMS COMPONENTS CLASSIFIED BY CLASSIFIED BY UNDERWRITERS LABORATORIES INC. UNDERWRITERS LABORATORIES INC. Español: Cuidado del Acabado Warranty S Your Filter Faucet is operable without the filter installed. Français: REMPLACEMENT DE LA CARTOUCHE DU FILTRE Pour obtenir une eau de meilleure qualité, changez le filtre tous les 3 mois...
  • Página 4 (psi). 950–910 + Los grifos Price Pfister cumplen con la Norma A112.18.1M de ANSI/ASME y los requisitos de velocidad de gasto de CSA B125K y FTC, de 2,2 gpm, 8,33 l/min., máximo a 60 libras por pulgada cuadrada (psi).