Control Panel - Resfriar 8 Serie Manual Del Propietário

2. Control Panel

Model R8:
• Red Light Function: With the lighting off, press the lamp key (1) once
to turn on the red light. To turn off this lighting, wait just over 3 seconds
and press the key (1).
• White Light Function: With the lighting off, short press twice the
lamp key (1) to turn on the white lighting, press the key (1) again to
turn off the lighting.
1
2
3
8 9
6 7 10
16
4
1 11
5
5
2
12
3
Remote Control
• Sleep Programming: Start the fan using the key (5), press the
sleep key (4) and the display will show the time of 0h. Press the key
(4) again, the display will show the time of 1h and the led (9) will flash
1 time indicating that the sleep is programmed for 1 hour. Press the
key (4) again, the display will show the time of 2h and the led (9) will
blink 2 times indicating 2 hours of sleep. If you want more time, you
can program up to 5 hours of sleep. To turn off the sleep function, just
press the key (4) until 0h appears on the display.
Note: When turning off the fan using the key (3) or the remote control
key (12), sleep programming will be automatically deactivated.
Control Panel / Remote Control Functions:
1 – Turns the lamp on/off
2 – Turns the water function on/off
4
3 – Turns off/decreases the fan speed
4 - Sleep programming
5 – Starts/increases the fan speed
6 – Indicates the water on function (green)
7 – Lack of water indicator (yellow)
8 – Battery indicator (red)
9 – Sleep indicator (blue)
10 – Bluetooth indicator (blue)
11 – Turns on/off the external lighting (if applicable)
12 – Turns the fan on/off (Remote Control exclusive function)