Intended Use; Technical Data; Before Start-Up - Würth 0891 385 008 Traducción Del Manual De Instrucciones De Servicio Original

Intended use

Pressurised spra appliances are intended for the
spra ing of alkaline cleaning and care products.
These agents must be approved b the manufacturer
for use in spra appliances.
Nitric, acetic and propanoic acids ma onl be used
in concentrations up to 10%, phosphoric and sul-
phuric acid up to 30%, and potassium and sodium
h droxide solutions up to 20%.
Not suitable for
• Combustible li uids
• Corrosive substances (certain disinfectant and
impregnating agents, acids, bases)
• Ammonia containing li uids
• Li uids ith temperatures greater than 40°C
• Wetting agents (surfactants) solvents and solvent
containing li uids, hich could trigger or pro-
mote cracking in the plastics used
• Viscous, stick or residue forming li uids (d es,
grease)
• Use in food production
o not under an circumstances use
• xternal pressure sources ithout an origi-
nal-e uipment compressed air filling valve
• For de agration
• For storage of li uids
• As an e e ash
mproper use can result in dangerous inju-
ries and harm to the environment.
The user is liable for damage in the event
of improper use.
cope of deliver [ g. ]
Overvie
1 Container
2 Pump
3 Hose
4 Instructions for use
5 Spra ing tube
6 Shut-o valve
Parts kit
7 Carr ing belt
26 Union nuts
27 Elbow
14

Technical data

tem
Max. filling uantit
Total content
Max. spra ing pressure
Max. operating tem-
perature
mpt eight
Total weight
Container material
Method of carr ing
Technical residual
uantit
Max. volume o
Recoil
Pressure change from
0 to 3 bar
ssembl
▸
Fasten the carr ing belt [7] to the container [1].
(Fig. 1)
▸
Push the hose [3] into the seating [9] and secure
it with the union nut [26]. (Fig. 2)
▸
Push the hose [3] on to the shut-o valve [6] and
secure it with the union nut [26]. (Fig. 2)
▸
Scre the spra tube [5] on to the shut-o
valve [6]. (Fig. 2)
▸
Screw the elbow [27] on to the spra tube [5].
(Fig. 2)

Before start-up

Visual inspection:
Are container [1], pump [2], hose [3], shut-o
valve [ ], piston manometer [8] and spra tube [5]
and elbo [27] ith nozzle, undamaged?
Note:
Check particularl the connections con-
tainer – hose and hose – shut-o valve,
as ell as the condition of the pump
thread and spra tube.
0891 385 008
5 l
8 l
3 bar
40 °C
2.6 kg
7.6 kg
Pol eth lene
On the side
< 0.07 l
1 l/min
< 5 N
At least 5000 x