Habitat Robin 822989 Instrucciones De Montaje página 3

EN
This manual contains important information that should be kept
for future reference.
Self-assembly.
Warning! Keep children away from the assembly area. Leave the
plastic bags out their reach. The small parts pose a choking hazard.
Dimensions
Mod. A: Dimensions of the unfolded bed: 190 x 91 x 211 cm.
Mod. B: Dimensions of the unfolded bed: 269 x 91 x 211 cm.
Bed dimensions: 194 x 140 cm.
Material
Cover: 100% polyester.
Seat cushion padding: polyurethane foam 35 kg/m
Back padding: polyurethane foam 15-25 kg/m
Structure: solid lacquered beech, plywood.
Suspensions: straps.
Mechanism: steel.
Bed base: electro-welded metal.
Mattress padding: polyurethane foam 25 kg/m
Mattress thickness: 13 cm.
Legs: solid lacquered beech.
Assembly Instructions
Before beginning assembly, identify all components using the
manual.
In order not to lose components, do not throw the package before
completing the full assembly.
This product must be assembled by an adult.
Plan to assemble the furniture as near as possible to where you
want to install.
Assemble on a clean, flat surface.
Be careful of the risk of pinching / jamming when assembling the
different parts of the sofa.
Recommendations for use
This product was designed for indoor use only.
Do not stand on the product.
Do not sit on the armrests.
Beware of sharp objects.
The transformation into bed is realized with a single motion
without moving the seat cushion and backrest.
Do not make changes in the metal mechanism.
Danger of pinching/squeezing when folding/unfolding.
During the first use of the convertible, remove the mattress
protective plastic to prevent the compressed air hinders the proper
functioning of the mechanism when folding the mattress. During
closing of the bed properly position the mattress whose movement
could damage the mechanism.
Do not leave pillows or duvet in bed couch position.
It is recommended to lubricate all mechanical parts to avoid the
creaking of springs, levers or joints etc ...
Maintenance
Do not place the product near a heat source (radiator, chimney,
etc.) or a source of moisture. Heat and moisture can damage the
product.
Avoid direct and prolonged exposure of the product to solar radia-
tion: colors may fade.
Flip and pat the seats, backrests and lumbar cushions regularly so
that they do not wear out and do not get dirty unvenly.
Do not use abrasive products.
Fabric upholstery
Vacuuming or brushing upholstery once a week: Dust accumula-
tion accelerates wear and dulling of colors.
Sponge up spilled liquids immediately with a clean, dry, dabbing
cloth to absorb the liquid.
Do not rub, it may damage the fabric. Color variations between
cleaned and uncleaned surfaces may appear.
To clean the cushion covers, dry clean.
Robin - 12/2022
.
3
.
3
3 .
2
If in doubt, call a professional to carry out cleaning.
Keep the label with lot number, it may be useful in case
BC
of complaint.
If you have any comments or suggestions regarding this product,
assembly instructions or service received, please enquire at your
nearest store or contact us on our website at: www.habitat-design.
com or write to this address: HABITAT, 70 AVENUE VICTOR HUGO,
93300 AUBERVILLIERS FRANCE.
The packaging elements are to be sorted out according to local
requirements. Make the right sorting choice and give them a
second life!
By sorting out this manual you contribute in preserving
the environment. This manual can still be found on
www.habitat-design.com.