Operating Instructions; Product Description; Product Usage - Kunft KTCR3848 Manual De Instrucciones

2. OPERATING INSTRUCTIONS

2.1. Product Description

Alarm 1
Buzzer / Radio
Indicator
Lights up when the
Alarm 1 is on.
TIME / MEM
In Off mode, press and hold to begin
setting the time. In radio mode, press
to cycle through preset stations.
VOLUME / AL2
Press to adjust
the volume+.
Press to begin
setting Alarm 2.
VOLUME / AL1
Press to adjust
the volume-.
Press to begin
setting Alarm 1.
STANDBY
Press and hold to
turn the radio off.
FM antenna
Introduction and Setup
AC Power
To power the unit, insert the main plug into the power outlet.
Power source: 230 V~ 50 Hz
Alarm 2
Buzzer / Radio
Indicator
Lights up when
the Alarm 2 is on.
Tuning - / Min
Press to tune the
radio.
Press to adjust
minutes when
setting the clock or
alarm.
Tuning + / Min
Press to tune the
radio.
Press to adjust
hours when setting
the clock or alarm.
SNOOZE / SLEEP
Press to snooze the alarm after it beeps.
Press repeatedly to set the sleep timer.
8
clock radio
DC backup
DC backup: 3 V battery (2 x AAA/LR03)
NOTE:
Do not mix old batteries with new ones.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad,
ni-mh, etc.) batteries.
Replace the battery if the device is not used for a long time (more
than 1 month);
Please remove the batteries to avoid any leakage of battery acid.

2.2. Product usage

Clock and Sleep Timer
Setting the Clock
1. If in Radio mode, press and hold the
2. Press and hold the TIME/MEM button until the display begins to
blink, then release the button.
3. Press the HOUR button to adjust hours.
4. Press the MIN button to adjust minutes.
5. Press the TIME/MEM button to finish setting the time.
EN
KTCR3848
button to turn the unit off.
9