EASY FAST NGW000017NOC Manual De Instrucciones página 8

ELECTRIC KETTLE
8
•
Put the kettle on the base.
•
Plug the power plug into a power socket.
•
Turn on the kettle by pressing the switch (2).
•
•
Before removing the kettle from the base ensure that the kettle is switched
•
Do not use the kettle without water inside.
CLEANING AND DESCALING THE KETTLE
Deposits and limescale must be removed regularly, at least once a month. You
can use following ways to clean the kettle from the deposits:
•
0,2 L of 8% white vinegar, which must be poured into a clod kettle and leave
without cooking, for 2 hours. Then empty the kettle and boil clean water,
•
30g of citric acid with 1/2L water boil in the kettle, leave there for 30 minutes.
•
To clean the outer parts of the kettle use damp cloth moistened with liquid
dishwashing detergent. To clean the base use a dry cloth only. No not use
solvents, thinners, or cleaners that may damage or scratch the kettle and its
elements.
Technical data:
220-240V ~ 50Hz, 1200-1500 W, capacity: 1.8L