CRAFT+MAIN COVE NEO-ANGLE Manual De Instrucciones página 7

INSTALLATION PROCEDURE / STEP 4
1. Install washers (11, 12, 23) on the glass and use the screw 1/4" x 5/8" (10)
5
to fix the top & bottom track (14).
2. Glue a little silicone at the bottom of bottom track (14).
3. Use the allan key kit (21) to tighten the screw.
4. Install the screw cap (17).
5. Install the wall channel cap (1).
LEFT HAND ASSEMBLY
RIGHT HAND ASSEMBLY
- 6 -