Cleaning The Rotary Brush - Taurus IDEAL AVANT Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
- Dust tank filter, it is advisable to be changed
at least once a year or every 100 hours of the
appliance's use.
TO REMOVE THE FILTERS:
- Open the lid containing the EPA filter at the top
of the tank, turn the filter to unlock it, remove
the tank and push the filter up from the bottom
(Fig. 3).
- The motor filter is located inside the cyclone
located in the tank. Remove the tank by pres-
sing the extraction button (B), lift the cyclone
with the handle and remove the sponge filter.
(Fig.4).
- To reassemble the filter, proceed with the abo-
ve instructions, in reverse order.

CLEANING THE ROTARY BRUSH:

- Remove the transparent cover from the top of
the shoe (Fig. 5).
- Lift the brush by the piece located at the end
of it.
- For assembly, insert the brush into the anchor,
align the cover with the tabs on the front and
press until you hear the click.
SUPPLIES
- Supplies can be acquired from distributors
and authorised establishments (such as filters,
etc...) for your appliance model.
- Always use original supplies, designed specifi-
cally for your appliance model.
- These supplies are available in specialist
shops.
HOW TO REMOVE THE BATTERIES FROM
THE INTERIOR OF THE DEVICE:
- CAUTION: It is important that the batteries are
fully discharged prior to its withdrawal from the
apparatus.
- CAUTION: the appliance must be disconnec-
ted from the supply mains when removing the
batteries.
TO REMOVE THE BATTERIES, ONCE THE
LIFE OF THE APPLIANCE, PROCEED AS
FOLLOWS:
- Safely remove the battery from its housing by
pressing the battery removal button. (J)

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido