Product Description - JBM 60039 Manual De Instrucciones

EN

PRODUCT DESCRIPTION

The brushless electric pressure washer is designed to clean
vehicles, equipment, tools, outdoor furniture, etc.
Includes a regulable nozzle which allows you choose the
suitable stream of water depending on the dirty and the surface
you are cleaning.
GENERAL SAFETY INSTRUCTIONS
WARNING! Read all safety warnings and instructions.
Failure to follow the warnings and instructions listed below may
result in electric shock, fire and/or serious injury.
• Keep all instructions for future reference.
Do not use power tools in explosive atmospheres, e.g., in
•
the presence of flammable liquids, gases or dust. Power
tools create sparks that can ignite liquids, gases or dust.
• Keep children and bystanders away while operating a
power tool. Distractions can cause loss of control.
WARNING! Do not attempt to modify this product or create
accessories not recommended for use with this product. Any
such alteration or modification is misuse and could result in a
hazardous situation that could lead to personal injury.
WARNING! If any parts are damaged or missing, do not use
this product until the parts are replaced. Use of this product with
damaged or missing parts could result in serious personal
injury.
ELECTRICAL SAFETY
• The plugs of the battery charger must match the socket.
Never modify the plug. Unmodified plugs that match the
sockets will reduce the risk of electric shock.
• Do not expose power tools, battery chargers or batteries to
rain or wet conditions. Water entering the tool, chargers or
batteries will increase the risk of electric shock.
• Never use a power tool under rainy conditions.
PERSONAL SECURITY
• Stay alert, be aware of your surroundings, observe what
you are doing and use common sense when operating the
power tool. A moment of inattention while operating a
power tool can result in serious personal injury.
•
Do not use a power tool when you are tired or under the
influence of drugs, alcohol or medication.
• Use personal protective equipment. Always wear eye
protection. Wearing protective equipment, such as dust
masks, non-skid safety shoes or boots, heavy-duty gloves,
heavy-duty long pants, long sleeve shirts and hearing
protection, will reduce the risk of personal injury.
• Avoid unintentional starting. Make sure that the switches
are in the off position before connecting the battery to the
power tool or plugging it into the power supply.
•
Never pick up or carry the power tool with your finger on
the trigger. Carrying the power tool with your finger on the
switch or activating power tools with the switch on can
cause accidents.
• Do not overextend. Maintain balance and stability at all
times. This allows for better control of the power tool in
unexpected situations.
Dress appropriately. Do not wear loose clothing or
•
jewellery. Keep hair, clothing and gloves away from
moving parts. Loose clothing, jewellery or long hair can get
caught in moving parts.
• Do not force the tool. Use the correct tool for the
application. The correct power tool will do the job better
and safer if used at the rate for which it was designed.
Do not use a power tool if the switch does not turn it on or
•
off. Any power tool that cannot be controlled by the switch
is dangerous and must be repaired.
• Remove the battery from the power tool or power source
before making any adjustments, replacing or repairing
parts, cleaning the tool, leaving it idle or unattended,
transporting or storing it. These preventive safety
measures reduce the risk of starting the power tool
accidentally.
Store power tools out of the reach of children and do not
•
allow persons unfamiliar with the tool or these instructions
to operate the power tool.
• Maintain power tools. Check for misalignment or binding of
moving parts, breakage of parts and any other condition
that may affect the power tool's operation. If the power tool
is damaged, have it repaired before using it. Many
accidents are caused by poorly maintained power tools.
• Use the power tool and accessories in accordance with
these instructions, taking into account the working
conditions and the work to be performed. Using the power
tool for operations other than those intended could result
in hazardous situations.
Maintenance Safety
• Have your power tool or charger serviced by a qualified
technician using only identical replacement parts. This will
ensure that the safety of the power tool or charger is
maintained.
SPECIFIC SAFETY RULES
Never direct a jet of water at people or pets, or at any
•
electrical appliance.
Before starting any cleaning operation, close the doors
•
and windows.
Clear the area to be cleaned of debris, toys, outdoor
•
furniture or other objects that may create a hazard.
Never attempt to use the electric cleaner if ice has formed
•
on any part of the equipment.
• Always store the tool indoors to prevent it from freezing.
Do not use acids, alkalis, solvents, flammable material,
•
bleaches or industrial grade solutions on this product.
These products can cause physical injury to the operator
and irreversible damage to the machine.
Hold the electric cleaner firmly with both hands. Expect the
•
trigger handle to move when the trigger is pulled due to
reaction forces. Failure to do so could result in loss of
control and injury to the operator and others.
· 6 ·
REF. 60039