TMEZON MZ-VDP-NE202 Manual De Instrucciones página 10

Devices
Enable switch
Unlock delay
Door1
Signal mode
Signal type
Record mode
Door2
Message
Motion detection
Motion detection duration
Camera1
Motion dispiay
Motion ringtone
Motion Detection Push APP
Camera2
1: If the channel is closed, it will be skipped when monitoring the polling screen. This
channel and APP will not display this channel. Please set it carefully.
2: When Motion Detection Push APP is closed, the phone will not receive any push
information.
Ring
Door1/Ring1
Scheduie
Door1/Ring2
Time
Ring mode
Door1/Ring3
Ring select
Ring volume
Door2/Ring1
Out door volume
Door2/Ring2
Door2/Ring3
1: The ringtone of each channel can be set to three time periods, and different ringtone
types and volume can be set, but it should, be noted that there can be no gaps and
overlaps between the three time periods, otherwise the system will play the default
parameters.
2: Please note that the volume setting of the Door bell cannot be greater than the
volume of the indoor monitor.
GB - 17 support@tmezon.com
Door1
on
1
PAL
AHD1080
Video
off
off
20s
off
off
off
06:00-12:00
30S
Standard
1
8
5
Recording
Call record
2020122309325-002-Door1.mov
2020122309395-003-Door1.mov
Call record
2020122309385-004-Door1.mov
2020122309365-005-Door1.mov
Message record
Motion detect
Alarm info
1: Click the file to play directly, long press the file to enter the delete/read operation.
Live view on the monitor
Zoom out
07
25
Volume,brightness,contrast,saturation
25
25
Zoom in
Switch to the next channel, Door1>Door2>Cam1>Cam2
Snapshot
Video
Door 1/Door 2 unlock
Release the door which connected to the indoor monitor
Calling, Hang up/Return
GB - 18
Read
Mark all read
Delete
All delete
OFF
support@tmezon.com