Important; Before Using For The First Time - Carlo Cracco MasterPRO Manual De Instrucciones

EN
Cover
Blade
1.2L Glass cup
SAFETY
• The blades are sharp, handle with care. Hold the knife blade at the top away from the cutting
edge, both when handing and cleaning.
• Do not plug the appliance into the power supply unit it is fully assembled and always unplug
before die-assembling the appliances or handling the knife blade.
• Remove the knife blade before emptying the bowl.
• Never use and unauthorized attachment.
• Don't let children play with this appliance.
• Never use a damaged appliance. Get it checked or repaired: see "service".
• Never let the power unit, cord or plug get wet.
• Don't let excess cord hang over the edge of a table or workshop or touch hot surface.
• Never misuse your food chopper and lonely use it for its intended domestic use.
• Do not use if there is any visible damage to the appliance.
ON/OFF button
S/S body
Non-slip mat
05
• The appliance is not intended for, use by young children or infirm persons without supervision.
• Never leave the appliance on unattended.

IMPORTANT

• The appliance cannot operate continuously for more than 20 seconds. After this time, you must
wait for at least 1 minute before using it again. If you do not do this, the appliance may not work
properly again. Failure to do this may affect the performance of the appliance. It is recommended
to use the appliance for short on / off periods: this will improve the preparation of food, and this
ensures a longer life of the engine. The times for preparing various foods are indicated in the
following table.
• Do not operate the super chopper if the bowl is empty.
• Never operate the super chopper with the bowl filled with liquid.
BEFORE PLUGGING IN
Make sure your electricity supply is the same ad the one shown on the underside of the power
unit.

BEFORE USING FOR THE FIRST TIME

• Remove all packaging including the plastic blade covers from the knife blade. These covers
should be discarded as they are to protect the blade during manufacture and transit only.
• Wash the parts: see "cleaning".
TO USE THE FOOD CHOPPER
1. Place the non slip mat onto the work-surface, rib side down.
2. Position the bowl onto the middle of the non slip mat.
3. Fit the knife blade over the pin in the bowl.
4. Add your food, see processing guide.
• Cut large pieced of food into 1-2 cm (1/2-3/4 in pieces).
• Don't chop hard foods such as coffee beans, ice cubes, spices or chocolate-you'll damage the
blade.
5. Fit the splashguard. Make sure the slots in the splashguard fit over the handles in the rim of the
bowl.
• The super chopper will not operate unless the splashguard in fitted.
6. Fit the power unit.
• The power unit will only fit correctly in two positions.
7. Plug in. press down on the power unit for short lengths of time to produce a pulsing action-this
will avoid over processing the ingredients.
• If the machine labors, remove some of the mixture and continue processing in several batches.
• Stop the machine and scrape down if necessary.
• Do not run the super chopper continuously for longer than 20 seconds. Leave to cool for 1
minute in between each 20 seconds operation.
06
EN