Technical Specifications - Polar CR711 Manual De Instrucciones

EN
Fault
The appliance turns on,
but the temperature is
too high/low
The appliance is
leaking water
The appliance is
unusually loud

Technical Specifications

Note: Due to our continuing program of research and development, the specifications herein may be
subject to change without notice.
Model Voltage
CR711 220-240V~ 50Hz
Model Capacity
CR711 6 x 1/1GN
Note: For optimal product performance and efficiency, please ensure to mind the net usable capacity (load
limit) when filling.
6
CR711_ML_A5_v4_20221208.indb 6 CR711_ML_A5_v4_20221208.indb 6
Probable Cause
Ambient temperature is too high
Unsuitable foodstuffs are being
stored in the appliance
Appliance is overloaded
The appliance is not properly
levelled
The discharge outlet is blocked
Movement of water to the drain is
obstructed
The water container is damaged
The drip tray is overflowing
Loose nut/screw
The appliance has not been
installed in a level or stable
position
Temperature
Power Current
Range
235W 1.3A 2°C - 8°C
Net usable capacity (L)
132
Solution
Increase ventilation or move appliance to a
cooler position
Remove any excessive hot foodstuffs or
blockages to the fan
Reduce the amount of food stored in the
appliance
Adjust the screw feet to level the appliance
(if applicable)
Clear the discharge outlet
Clear the floor of the appliance (if
applicable)
Replace the water container
Empty the drip tray (if applicable)
Check and tighten all nuts and screws
Check installation position and change if
necessary
Dimensions
Refrigerant
H x W x D mm
R600a 870 x 1370 x 700
Weight
(kg)
140kg
2022/12/8 14:59 2022/12/8 14:59