CEA EQUILIBRIO EQB01 Manual Del Usuario página 38

disconnection in the conditions of
overvoltage category III, according to
the rules of installation.
The means for disconnection must be
incorporated in the fixed wiring, in
accordance with the wiring rules.
Use only the supplied power supply
in the following
CEADESIGN SRL cannot be held
responsible for any damage caused
by the use of power supplies different
from the one indicated.
The indicated power supply can
support a maximum power of 80W
(one towel rail L. 580 mm has a power
of 10W, one towel rail L. 1060 mm
has a power of 20W).
The power supply must be installed
in a vertical position inside the
junction box, as indicated in the
"INSTALLATION" section.
The junction box must have the
following minimal dimensions: L 155
x H 290 x W 70 mm (L 6 7/64" x H 11
27/64" x W 2 3/4").
The power supply must be installed in
an environment with a maximum of
temperature of 40 °C (104 °F).
ATTENTION!
When using electrical appliances,
basic precautions should always be
followed to reduce the risk of fire,
electric shock, and injury to persons.
Few areas of the electric towel
38
warmer could become very hot and
cause burns. Great attention needs to
be paid in the presence of children or
vulnerable people.
Keep
furnishings, and other combustibles at
least 900 mm (2' - 11 7/16") from the
instructions. front of the electric towel warmer.
Installation have to be made so that
the lowest heated towel rail is at least
600 mm (1' - 11 5/8") above the floor.
The electric towel warmer must not
be installed closely underneath of a
current receptacle.
Bad smells may be caused by residues
inside the electric towel warmer, or for
the inner plastic parts, since it works
with no liquids inside (dry system).
By working electric towel warmer, do
not lay delicate, silk or acrylic clothes:
they may burn beacause the towel
rail reaches high temperature when
covered (thermic isolation!).
Do not insert foreign bodies inside
the electric towel warmer or inside
accessories in order to avoid eletric
shocks, inflammations and damages.
Do not use the electric towel warmer
close to combustibles, paints or any
other inflammable liquid.
Keep the electric towel warmer
reasonably
(complying with the electrical safety
regulations), in order to avoid electric
shocks, or damages to it.
electrical cords,
away from
drapery,
water