Publicidad
Mampara Vitalio II
Mantenimiento / Maintenance
Use only warm water and mild, pH-neutral soap.
Test your cleaning solution in an inconspicuous location first before using across the
entire shower screen.
Clean all surfaces immediately after application, using only a soft cloth or damp
sponge.
Rinse all surfaces thoroughly with clean water making sure all cleaning solution has
been removed and no residue remains.
Do not allow the cleaning solution to remain on any surface as this can cause
permanent marks.
Clean the shower after each use: Glass, dry aluminum frame and hardware to
minimize water stains and mineral deposits. This is especially important in areas
where the water has a high mineral content.
Never use bristle brushes, abrasive pads, or instruments on glass or anodized
aluminum surfaces.
Using such items can cause permanent scratches.
Always make sure you have read the fine print on any commercially available "shower
/ bath" cleaning product to determine suitability.
11
Publicidad
