Inserting The Card - Optimus UMX-LNK/E Manual De Instrucciones

4. INSERTING THE CARD

Card UMX-LNK/E may be inserted in slots 3 to 10 of the COMPACT audio matrix or slots 1 to 10 of the UMX-03/0 audio matrix.
To insert the card proceed as follows:
1) Disconnect the power supply
to the unit (POWER SUPPLY 1
and POWER SUPPLY 2 strips).
2) Remove the rear blank plate
for the slot where the card is
to be inserted. The card
occupy an slot.
3) Insert the card by fitting it
into the slot guides and
fasten it by means of the
fastening screws.
4) Reconnect the power.
UMX-LNK/E version 3.2.000 ENG
UMX-LNK/E
Audio link card for slave matrix
COMPACT-E or UMX-03/0E
Figure 4
Figure 5
7