Emptying the dirt collecting container
If you want to take out the dirt collecting container to
empty it, take it by its handle and pull up.
10. Maintenance
Use a wet cloth for plastic parts cleaning. Do not use
any cleaning agents, solvents or sharp objects.
After every use - Remove the appliance off dust and
dirt.
If the brush is not rotating it can be that the storage of
the brushes is dirty or the belt isn´t good. Clean and
lubricate the bearing of the brush or replace the belt
Service information
Please note that the following parts of this product are
subject to normal or natural wear and that the following
parts are therefore also required for use as consum-
ables.
Wear parts*: Brushes, drive belts, wheels
* Not necessarily included in the scope of delivery!
Spare parts and accessories can be obtained from our
service centre. To do this, scan the QR code on the
cover page.
11. Storage
For any longer storage the appliance must be thor-
oughly cleaned and stored so as unauthorised persons
could not access it.
• Empty the dirt collecting container
• Store the appliance when it is dry
To save spaces, the sliding handle can be folded.
Loosen the screws, pull the sliding handle out and fold
forward.
12. Disposal and recycling
Notes for packaging
The packaging materials are recy-
clable. Please dispose of packag-
ing in an environmentally friendly
manner.
www.scheppach.com
GB | 13