QNAP QHora-321 Guía De Instalación Rápida página 4

1
LED
1
Power
2
System Status
QuWAN
3
Orchestrator
Status
Auto-mesh
4
Connection Status
Note: The front panel LEDs will turn on during the reset process.
Reset
QHora-321 Front Panel LEDs
GREEN=LAN
AMBER=WAN 1 WAN
3
2 4
Status
Yellow-green
Off
Flashes yellow-green every 1
second along with the system
status LED
Orange
Flashes orange every 1 second
Flashes orange every 2 seconds
Flashes orange every 1 second
along with the power LED
Off
Blue-green
Flashes blue-green every 0.5
seconds
Flashes blue-green every 2
seconds
Off
White
Flashes white every 2 seconds
Off
2 3 4
The router is powered on.
The router is powered off.
A system error occurred.
The router has powered up and initialized.
The router is being initialized.
The firmware is being updated.
A system error occurred.
The router is powered off.
The router has joined the QuWAN Orchestrator
topology and is connected to the SD-WAN network.
The router is joining the QuWAN Orchestrator SD-
WAN network.
The router has lost connection to the QuWAN
Orchestrator SD-WAN network.
The router is not part of the QuWAN Orchestrator
SD-WAN network.
Connected: All the mesh VPN tunnels established
by the device on the QuWAN Orchestrator SD-
WAN network are accessible.
Partially connected: Few of the mesh VPN
tunnels established by the router on the QuWAN
Orchestrator SD-WAN network are inaccessible.
The router is not part of the QuWAN Orchestrator
SD-WAN network.
DC IN
5 6
QHora Series
Description