1. Adjust the temperature: Press the button
Where
to modify and store the displayed value. Push the button
cold room temperature.
2. If no other button is pressed within 10 seconds, cold room temperature will be displayed.
3. Lighting: Press the button
Manual defrost with stop/start:
Push the button
and hold for 6 seconds to defrost or stop defrost.
4. Refrigeration LED: During refrigeration, the light is on; When the cold room temperature is constant, the
light is off; During delayed start, the light flashes.
5. Defrost LED: during defrost the LED is on; when defrosting stops, the LED is off. During the delayed
defrost display, the LED flashes.
Evaporator
Evaporator
Water recovery
tank
, the set temperature is displayed. Push the button
, it lights up; press again, it stops.
to exit the setting and display the
Glass door
EN
Water recovery
tank
LEDs
Cart