Assembly - Adventuridge FLX-FHM-S01 Manual Del Usuario

Assembly

Assembly
NOTICE
Risk of damage!
If you set up the hammock on uneven ground, you may damage the
hammock .
- Before assembling the hammock, make sure the work area is as
level and flat as possible . Remove stones, branches or other
objects that can endanger the stability of the hammock stand .
1 . Loosen the hooks
hooks are pointing upwards (see Fig. B) .
2 . Pull the frame
inside the frame
3 . Secure the folding joints
(see Fig. C)
4 . Put the end caps
(see Fig. D) .
5 . Insert the mat supports
both ends at both ends of the hammock
13
6 . Hang the hammock
The drink holder
The first time you hang up the hammock, it will take some force . Be careful and get
a second person to help you .
When the hammock is clamped into the frame for the first time, it can happen
that the mat hangs very high and tightly in the frame . After the first use, the
fabric gives way and the mat hangs lower in the frame . This also makes it
easier to get started .
7 . Unfold the storage net
fasten it tightly around the four legs of theframe (see Fig. G) .
8 . Place the cushion
9 . Your hammock is now ready for use (see Fig. I) .
12 12
of the frame
8
completely apart (see Fig. B), making sure that the straps are
1
are inside the frame .
13
at the four corners of the frame with the locking pins
15
onto the tube ends at the base of the hammock frame
3
into the pockets on the underside of the hammock at
2
on the hooks
4
and the magazine bag
11
and fasten it with the hook and loop fasteners
5
on the hammock (see Fig. H) .
6
from each other and make sure that both
1
(see Fig. E) .
4
of the frame
8
must point downwards (see Fig. F) .
10
.
1
9
and
12