Planika Cabo Manual De Montaje página 10

1. Turn the device on by pressing
2. If the fuel container is empty (START/STOP BUTTON BLUE LIGHT ON), unscrew the cap with the pumping hose
and remove the container from the holder
3.Insert a full fuel container with a cap removed (II) and screw the cap with the pumping hose back on (III).
(START/STOP BUTTON GREEN LIGHT ON)
When the START/STOP button is lit up in green, the device is ready to be launched.
Press START. Firing up of the device takes from 2 to 10 minutes (FLASHING GREEN LIGHT). During the process of
firing up, scent of fumes can be present. When the lights stop flashing, the device is lit up and has reached the working
temperature.
When the flame is on, press the
one of the six flame heights. The flame starts on height 4 by default.
NOTE. In case of too high a temperature of the device, the flame height will be automatically decreased and locked
from changing. If the temperature continues to increase, the flame will be extinguished (RED LIGHT)
To extinguish the flame:
-press STOP.
Flashing red light indicated the device being cooled. Restarting the flame is possible only after complete cooldown of
the device (GREEN LIGHT).
To turn the device OFF, press
The device will automatically turn off in case of any work related errors. (check the error in the mobile app).
REPLACING FUEL CONTAINER
.
(BLUE LIGHT FLASHING). (I)
I
FLAME IGNITION
FLAME HEIGHT REGULATION
or button on the remote or scroll the flame level bar in the mobile app to choose
FLAME EXTINGUISHING
TURNING THE DEVICE OFF
.
10
II III