Other Functions - NATURE & DECOUVERTES 53156650 Manual De Instrucciones

Set up RF Sensor receiver:
1. After the clock & sensor are powered on, the weather station will automatically receive the outdoor
temperature & humidity within 3 minutes. To reset the sensor in case of malfunction click on the sensor
backside left round button when powered on. Once sensor is reset it should reconnect with the
weather station.
Click it to receive the signal asap.
2. Clear data of the external sensor on the weather station: Under Clock Mode Display, Press "UP" key
3 Seconds.
3. If no data is received from on the weather station from the sensor within 35 min the CH temperature
will display "--.-»
4. RF Receive Range within 30 meters.
5. Once missing the temperature, need to receive the signal again then can resume the display.

OTHER FUNCTIONS

Weather forecast:
1. Weather Forecast refer to the trend of weather condition 24 hours later from now.
2. The weather is divided into 6 levels: sunny, semi-clear, cloudy, rain, snow, and lightning (semi-clear,
rain, snow, and lightning must be displayed with clouds).
3. Power on default: semi-clear.
4. Warning :The weather forecast must be more accurate under natural ventilation. There will be a
large error in indoor conditions, especially in air-conditioned rooms.
Temperature and humidity
Indoor Temperature test range: 0°C - +50°C
Humidity test range: 20%-95%
Outdoor temperature test range: -20°C - +70°C
+
-
-
+
8 9