Publicidad
Idiomas disponibles
Idiomas disponibles
ENG ORIGINAL INSTRUCTIONS
DO NOT ABUSE THE CORD.
Never use the cord to carry, lift or unplug the power
tool. Keep the cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled
cords increase the risk of electric shock. When
operating a power tool outdoors, use an extension
cord suitable for outdoor use. The use of an
extension cord suitable for outdoor use reduces
the risk of electric shock. If the use of a power tool
in a damp location is unavoidable, use a power
protected by a residual current device (RCD). The
use of an RCD reduces the risk of electric shock.
STORE POWER TOOLS.
Store power tools out of reach of children and
not allow the handling of power tools to people
unfamiliar with the tools or these instructions.
Power tools are dangerous in the hands of
untrained users.
MAINTENANCE.
Check moving parts for misalignment or binding,
there are no broken parts or other conditions
that may affect the operation of power tools.
Power tools are repaired before use when they
are damaged. Many accidents are caused by
poorly maintained power tools. Use power tools,
accessories and tool tips, etc. according to these
instructions and in the manner provided for the
particular type of power tool, taking into account
the conditions work and work to develop. The use
of the power tool for applications other than those
intended could result in a dangerous situation.
Please check your power tool serviced by a
Werku
official repair service using only identical
®
replacement parts. This will ensure the safety of
the power tool is maintained.
DESCRIPTION OF THE PRODUCT.
The projector has been designed to carry out jobs
of illuminate construction sites and working areas.
Refer to this plan to familiarize yourself with the
projector before use.
1
8
4
7
6
1. Protective glass
2. Bracket
3. Handle
4. Hinge
5. Electric box
6. Cable and plug
7. Device nameplate
8. LEDS
USE INSTRUCTIONS.
Before starting up the projector, we recommend
that you carefully read all the instructions as
indicated. Please respect all regulations regarding
the prevention of accidents, health and safety
directives, laws and applicable restrictions for
work places. The projector must only be used
by persons who have been instructed in its use
and only for the purposes for which it has been
designed.
POWER SUPPLY.
Make sure the power supply is adapted to the
requirements shown on the information panel of
the projector (1). Using the motor at low voltage
will make it operate slowly. This will reduce
performance and may cause the motor to overheat.
EXTENSION CORD.
If the working area is at some distance from the
power supply, use an extension cord of enough
diameter and quality.
3
English
3
5
4
2
Publicidad
