Using The Appliance - MPM MMS-01 Instrucciones De Funcionamiento

USING THE APPLIANCE

 Appliance can be used for dry vibration massage or wet massage.
 Dry vibration massage can improve blood circulation and release muscle tension.
 Wet massage (with optional addition of non-foaming bath salts) helps to calm and relax.
 Infra-red stimulates blood circulation.
WARNING! Do not use the massager if you are pregnant, or suffer from thrombosis, open wounds, broken skin
and varicose veins. Consult your doctor first!
1. Make sure that device is unplugged.
2. Fill the massager with warm water.
3. The water level should not exceed the MAX mark on the inner surface of the device.
4. Plug the device into the socket.
5. Place the massager on even surface. Place the feet inside the massage tub and use the switch
to select the operating mode.
MASSAGE IN WARM WATER WITH INFRARED HEATING
– the built-in heating element will keep the water warm during the massage session.
VIBRATION MASSAGE WITH BUBBLES IN WARM WATER
– the vibration, bubbles and the air coming through the outlets will generate additional relax-
ing effect and improve blood circulation.
VIBRATION MASSAGE WITH BUBBLES AND INFRARED HEATING
– the vibration, bubbles and infra-red will generate additional relaxing effect and improve
blood circulation, especially in long winter evenings.
MASSAGE TIPS
Massager is equipped with:
 3 massage tips 5
massager.
 4 remowable massage rollers
MASSAGE DURATION
1. 10 minutes of a foot massage a day is enough to release psycho-physical stress.
2. When needed, you can change duration and frequency of a massage.
WARNING! The massager is designed for intermittent use. It can be applied without interruption not longer
than 20 minutes, then the motor must be allowed to cool.
CLEAN AND CARE
1. Switch the appliance off and ensure that the massager has completely cooled. Unplug it from
wall socket.
6 7 , to be fitted in the mounting hole
8 . Massage can be peformed with or without the rollers.
4 in the middle part of the
13