User Manual
English
User configuration:
The KVM switch supports password protection for 1 Administrator and 3 Users. By default the status is
Disable on each of them.
If setting one to Enable, then hit Enter to setup the User Profile:
Passwords have to be stored when leaving the OSD menu, after the next logout the security options are
enabled. User rights have to be set individually on each port in Access setup menu by choosing from
Grant/View/Deny.
OSD Timeout: specify OSD timeout, from 0 (disabled) to 60 sec.
Title bar: specify the title bar position on the screen, Left/Right/Disable.
Title duration: specify how long the port info is displayed on the screen, from 0 (always) to 60 sec.
AutoScan period: specify the duration time per port for auto scan, from 0 (disabled) to 60 sec.
DDC configuration:
Load default DDC data or read DDC data from the attached monitor
Troubleshooting
If you have problems with PS/2 connections, please make sure that USB legacy support has
been disabled in the BIOS. Whenever possible, use USB ports to connect to the KVM switch.
Use ONLY the Lindy KVM Combo cables to connect the PC/Server.
If you are faced any unexpected problems with the KVM switch please don't hesitate to contact
LINDY Support.