Publicidad
•
Be careful when adjusting the position of the tray, the footrest and
when unfolding or folding the chair, as there is a risk of pinching your
fingers.
•
Use the tray always in combination with safety belts! The tray is not
intended to protect the child from falling.
•
Never lift, move, fold, adjust or repair the seat when there is a child in
it. This can injure the child.
•
Always before use, check the functioning of the locking mechanisms.
•
Before placing the child in the seat, make sure that it is fully unfolded
and locked in the open position and that all locking mechanisms are
tightly closed! This will prevent the child from being injured by sudden
folding of the chair.
IMPORTANT! The diagrams and figures in this instruction are illustrative and
indicative only. Check the securing of the fixation after each operation.
Components – illustrations A,B,C,D ,
А. Seat unit; B. Set of legs – 2 pieces (front and back feet); C. Two part serving
tray; D. Wheels – 4 pcs.
Assembly of the structure
WARNING! Make sure that the base is assembled correctly and is stable, this
ensures the safety of your child!
Strictly follow the instructions and sequence for assembling the product as
shown in the diagrams.
1. Press and hold the button shown in Figure 1 to open the frame all the way
down.
2. Press the button shown in Figure 2 to remove and fix the tray.
3. Insert the front and rear legs into the respective pipes on the seat frame.
Press until you hear a clicking sound and the spring-loaded buttons tighten and
come out of the holes provided for them (Figure 3).
4. The tray can be adjusted in three positions. To adjust the position of the
tray, pull the front lever from the underside of the tray and slide it along with
the tray to the desired position (Figure 4).
Attention! Use the tray always in combination with safety belts! The tray is not
intended to protect the child from falling.
ASSEMBLY AND EXPLOITATION
14
Publicidad
