DeWalt DCL183 Manual De Instrucciones página 7

Checking State of Charge (Fig. C)
• When the LED light is ON, the charge indicator LED
will illuminate green, yellow or red indicating the percent
of charge in the battery:
gREEn:
- ≥50%
- YEllOW: >25% to >50%
RED:
- ≤25%
• If less than 3%, light and indicator will flash two times
every 45 seconds until out of power.
• If the color of the charge indicator LED
not illuminate, charge the battery.
SPECIFICATIONS
Voltage
Battery type
Lumens
Spot light LED
Side light LED
Light Beam Angle
Spot light LED
Side light LED
Run Time When Fully Charged
Spot light LED
Side light LED
OPERATION

CAUTION: Do not stare into the LEDs. Serious eye
injury could result.
Multi Function Button (Fig. A)
The spot light LED 6 two brightness settings, low and high.
The side LED 5 has one brightness setting.
low battery indication. If less than 3%, the activated
LED and charge indicator LED will flash two times every 45
seconds until out of power.
nOTE: If the light remains on for more than five seconds,
pressing the multi function button
turning off off the selected LED.
nOTE: With the light activated, a long press of the multi
function button 1 will result in turning off the selected LED.
1. Press the multi function button
spot light LED high setting.
6
2. Press the multi function button
activate the spot light LED
3. Press the multi function button
the side LED .
5
4. Press the multi function button
off the side LED 5 .
12
12 is red or does
DCL183
V 4
DC
18650 Li‑Ion
Low ‑ 250
lm
High ‑ 1000
lm 400
degrees 15
degrees 90
Low ‑ 6.5
hours
High ‑ 2.5
hours 6.5
1 again will result in
once to activate the
1
1 a second time to
6 low setting.
a third time to activate
1
1 a fourth time to turn
Magnet (Fig. A)

CAUTION: When the LED light hangs by the magnet,
do not shake the LED light or the object from which
it hangs. Do not hang the work LED light overhead
or from anything that is not secure. Personal injury or
property damage may occur.

CAUTION: Only use the magnet for hanging the LED
light. The magnet is not intended to support additional
weight. Do not attach or hang anything additional to the
LED light or risk of breakage may occur.
1. The DCL183 has a magnet
the light.
2. The magnet is intended for catching small metal parts
4
such as screws and bolts or to hold the light in place on
solid metal surfaces.
Hang Hook (Fig. A, D)

CAUTION: When the LED light hangs by the hang
hook, do not shake the LED light or the object from
which it hangs. Do not hang the LED light overhead or
from any electrical wires or anything that is not secure.
Personal injury or property damage may occur.

CAUTION: Only use the hang hook for hanging the LED
light. The hang hook is not intended to support additional
weight. Do not attach or hang anything additional to the
LED light or risk of breakage may occur.

CAUTION: Do not use the hang hook to reach with or
to support your weight in any situation.
The built in hang hook 7
hoses, pipes, tubes or cables in the space you are working in.
1. To access the hang hook
from the housing 2 until the hang hook opening
is exposed.
2. Place the hose, pipe, tube or cable in your work space into
the hang hook.
nOTE: Ensure the LED light housing is fully secured and
will not slide off or along the anchored hose, pipe, tube
or cable before proceeding.
3. To remove the hang hook
pipe, tube or cable, grasp the hang hook
the anchored hose, pipe, tube or cable from the hang
hook opening 14 .
4. Secure the hang hook
MAINTENANCE
Your D WALT product has been designed to operate over
e
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper care
and regular cleaning.
Cleaning

WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of the
tool. These chemicals may weaken the plastic materials
used in these parts. Use a cloth dampened only with
water and mild soap. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
4 built into the bottom of
can be be attached to anchored
, rotate the hang hook
7
from the anchored hose,
7
7 and slide
7 into place onto the housing
English
away
7
14
2 .
5