Using The Device - ARDES ARMIX02 Folleto De Instrucciones

USING THE DEVICE

Hand blender
This appliance is useful for the processing of sauces, soups, mayonnaise, baby food or food for the elderly,
mixed drinks, smoothies etc.
- Connect the stem (4) to the motor body (3) and turn it to lock it (Fig. 1).
- Cut the food into cubes of no more than 15 mm, then place them in a container with a high edge to avoid
splashes.
- Add drinking water, milk, etc. depending on the preparation.
- Insert the stem into the container making sure that the blades are completely immersed in the mixture.
- Connect the plug to the socket.
- Press the speed button (1) or the TURBO button (2) to start the appliance:
- Button (1): the blender will operate at the speed set by the knob (6);
- TURBO button (2): the blender will operate at maximum speed.
To blend food well and quickly, use one hand to hold the bowl and the other to hold the main unit and perform an
alternating up and down motion. To stop the product, simply release the speed button (1) (2).
Note: do not operate the appliance for more than 1 minute. Let it cool for 5 minutes before using it again.
Note: to keep the blade seal efficient, do not operate the appliance without foods.
- Disconnect the plug from the socket after processing.
Disconnect the plug from the power outlet before performing any cleaning and maintenance operation.
Remove the accessories from the motor body (3).
To clean the product, do not use metal brushes, nylon brushes, household cleaners or thinners
and other similar products as they could damage the surface of the appliance.
Do not use sponges and abrasive products.
Motor body (3)
To clean the motor body (3) use a soft and slightly damp cloth.
Do not use overly wet substances, liquids or cloths, because any infiltration could damage the unit irreparably.
Wipe dry with a dry cloth.
NEVER SOAK THE UNIT IN WATER.
Stem (4), stem blades (5)
Wash with warm running water and washing-up liquid. Do not immerse in water. Do not wash in the
dishwasher.
Avoid wetting the areas of attachment to the motor body of the stem (4) to prevent water from filtering inside
the gears.
Be careful when handling the blades during cleaning. Do not touch them directly. Do not immerse the blades in
water to avoid touching them inadvertently.
Completely dry the accessories after cleaning.
8
MAINTENANCE