Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
Problem
Cleaner doesn't start
Reduced suction
The charging indicator
light fails to turn blue
during charging
(led 1 to 3 flashes blue
indicates the status of
charging)
Insufficient application
time after charging
Light flashes from red
to blue intermittently
Possible cause
Flat battery
The dust bin is full of dust
Filter is blocked
The airway is blocked
The charger is not fully
inserted into the cleaner
The charger is not connected
to the mains power
Insufficient charging time
Normal discharge
reduction in battery
Battery is not inserted
into the cleaner properly
Solution
Charge the vacuum cleaner
Empty the dust bin
Clean or replace the filter
Clear the airway
Reinsert the charger into the
cleaner, ensuring it is securely
in place
Connect the charger to the
mains power
Fully charge the battery according
to the instructions described in the
charging section
Purchase a new battery
Remove the battery and reinsert it
into the cleaner until you hear it
click into place
Publicidad
