Descargar Imprimir esta página

Marathon CL030027-FD-NA Manual Del Usuario página 13

Publicidad

Idiomas disponibles

Idiomas disponibles

Thermometer
Press the
°C/°F
If the temperature is out of the measurable range, LL.L (beyond the
minimum temperature) or HH.H (beyond the maximum temperature) will
be shown on the LCD.
NOTE: The clock might not work properly if the temperature is higher than
50 °C.
Troubleshooting
Use a pin to press the
time, even when the radio-control icon is visible on the display. This may
happen when the external noise is strong enough to interfere with the
time signal.
Press the
button on the outdoor remote sensor if the readout is
RESET
incorrect or does not respond.
Precautions
The clock loses its time information when the battery is removed.
Set up the outdoor remote sensor away from direct sunlight and rain.
Do not subject the clock to excessive force or shock.
Do not expose it to extreme temperatures, direct sunlight, dust, or
moisture.
Avoid contact with corrosive materials. Do not clean the device using
abrasive or corrosive materials or products. Abrasive cleaning agents may
scratch the plastic parts and corrode the electronic circuits.
Do not tamper with any of the internal components of this clock. This
may cause damage to the components.
button to set temperature in Celsius or Fahrenheit.
button if the clock is displaying the incorrect
RESET
EN

Publicidad

loading