FUXTEC FX-RM Serie Manual De Instrucciones página 66

Original User Manual FUXTEC FX-RM Series_de_en_fr_ita_es_rev23
USING THE MULCH KIT
Open and hold rear flap (A), then insert mulch kit (B) into the opening provided. Close rear flap (A) -
Ready
Note: A mulching blade is already mounted and does NOT need to be mounted additionally.
26.
IMPORTANT
- regular, careful maintenance is necessary to ensure that the safety level and
performance of the device remain unchanged.
1) Keep all nuts, screws, and bolts tightened to ensure that the device is in perfect working condition.
Regular maintenance is necessary for the safety and performance of the device
2) Never store the device with the tank still full in a building where escaping vapors can reach a flame,
spark, or heat source.
3) Let the engine cool down completely before storing the device in closed rooms.
4) Keep the engine, exhaust silencer, and fuel tank free of grass, leaves, or excess grease. Never leave
containers with cuttings in rooms.
5) For safety reasons, do not use the device when parts are worn or damaged. Parts should be replaced.
Repairing damaged parts is not sufficient. Use original spare parts. Parts that are not of the same quality
can damage the device and endanger your safety.
6) If the fuel tank needs to be emptied, you should do this outdoors and with the engine cold.
7) Wear solid working gloves when removing or reattaching the blade.
8) Check that the blades are firmly and evenly seated after sharpening.
9) Regularly check the self-closing protective shield and grass catcher bag for wear and tear.
10) When operating, transporting, or tilting the device, please observe the following:
- Wear solid working gloves;
- Hold the device in places that provide a firm grip. Pay attention to weight distribution.
CLEANING (EASY CLEAN function)
66
Maintenance and cleaning (EASY CLEAN)
The mulching inserts (or also called
mulching kit) shown here depend on the
model and may differ from the
illustrations.