Nexxt Solutions Nyx300 Configuración página 2

Recommendations: We recommend to work with the Nyx300 stand-alone. This is because
sometimes the PC or Laptop are connected to a Wireless Signal or via LAN to the main router
or modem. If you are using a Laptop or PC with Wi-Fi signal, please disable the Wi-Fi or turned
Off. This article
Requirements:

PC or Laptop (remember to disable the Wi-Fi)

Nyx300

Ethernet cable (this will come in the box)

Power Adapter (this will come in the box)
NOTE: If you are using a Laptop or PC and do not have the Ethernet Port you will have to
connect the PC or Laptop via wireless. All you have to do is the following.
 Turn ON the Wireless or Wi-Fi on the Laptop or PC.

Search for networks in the vicinity

You will see the name of the SSID provided by the Nyx300. This will be something
like Nexxt_XXXXXX (where the Xs are the last 5 to 6 digits of the MAC Address of the
will set up the Nyx300 via Ethernet cable.