Publicidad
Idiomas disponibles
Idiomas disponibles
BL-126659.1
FEATURES
1. Measuring cup
2. Lid
3. Jug (1000ml)
4. Jug handle
5. Blade assembly
6. Motor base
7. Control knob
8. Base foot
9. Plastic bottle (600ml)
10. Bottle Lid
Control knob
P = Pulse
0 = Off
1 = Low speed
2 = High speed
HOW TO USE
Caution: Make sure the motor base is unplugged from the power source and the control knob is set at the
position 0.
1.
Clean the blender according to the instructions in the "CLEANING AND MAINTENANCE" section.
2.
Fasten the blade assembly to the jug.
3.
Place the jug onto the motor base. Align the mark "▽" on the blade assembly with "
base, then rotate the jug clockwise to have it locked on the motor base. The blender will not work if the jug
isn't locked into the motor base properly.
4.
Put the liquid and diced food into the jug (do not over the max line). The recommended ratio of the liquid
and diced food shall be 3:2 and never fill the jug with ingredients that exceed 35°C.
5.
Put the lid onto the jug. Insert the measuring cup into the middle of the lid, rotate clockwise to lock.
6.
Put the plug into the power outlet. Switch on the appliance by rotating the control knob to choose the speed
1, 2 or pulse function.
Pulse function: rotate and hold the control knob to position P; release the knob, the knob will back to
position 0, and the appliance will stop working.
7.
After use, rotate the control knob to the position 0 and remove the plug from the outlet.
8.
You can also use the bottle instead of the jug if you like:
1)
Put the liquid and diced food into the bottle (do not over the max line), then fasten the blade assembly
to the bottle opening. Never fill the bottle with ingredients that exceed 50°C.
2)
Place the bottle onto the motor base and lock, then you can begin the blending.
3)
When finished, replace the blade assembly with the bottle lid. In this way you have got a bottle of
healthy drink to enjoy freely.
Note:
For quick or delicate blending tasks, turn the control knob to the position P and hold it for a few seconds.
Operate several times until the consistence you want is obtained.
- 5 -
EN
" on the motor
Publicidad
