Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Dear customer, thank you for purchasing one of our Uniteck products. Please read all the instructions
carefully and thoroughly before using the product.
UNIFIX 200
Unifix mounting brackets have been specially designed to fix your Unisun photovoltaic panels or equivalent
(see compatible panels part):
•
Unifix 200 for your Unisun 80.12M(x2) / 100.12M(x2) / 100.24M(x2) / 110.12BC (x2) / 150.12M /
150.24M / 150.12BC / 200.24M
Easy to install, they can be attached :
•
to a rigid horizontal or vertical surface (eg wall, concrete floor, wooden frame).
•
to a round mast with a diameter of 40 to 60 mm (flange included)
•
to a signaling posts using flanges with M8 screws (not included)
With their galvanized steel structure and corrosion-resistant stainless-steel screws, they are perfectly suited
for outdoor use.
Equipped with a multi-position tilting system, Unifix mounting brackets optimize your panel's performance
depending on the chosen orientation.
0°
To connect the panel / regulator / battery, we recommend that you use the Uniconnect 1.6 ready-to-use kit
that optimizes your electrical performance and simplifies installation (kit for connecting 1 panel)
12
Electrical performance depending on tilt and panel
Adjustable
By 10 °
East
South east
South
90°
South west
West
www.uniteck.fr
UNIFIX 200
orientation
0°
93%
93%
93%
93%
93%
30°
60°
90°
90%
78%
96%
88%
100%
91%
96%
88%
90%
78%
55%
66%
68%
66%
55%
Publicidad
