Publicidad
Unfold all four corners of the crib so that you can catch the locking mechanisms in the
middle of each side. Lift the sides of the crib until they lock. Push the centre of the crib
down until it is fully unfolded and locked (you will hear a clicking sound). Place the
mattress in the cot with the soft side up. Attach the mattress to the base.
2. FOLDING THE COT - Remove the mattress. Pull the strap of the locking mechanism
on the bottom of the cot as MAXIMUM as possible to release the lock. ATTENTION!
Failure to pull the mechanism to its highest position may damage the locking of the
sides. Warranty conditions do not include damage caused by improper use of the
product. Find the buttons in the middle of each side. Press them and fold all sides of
the crib. Take the mattress and wrap it around it. Close the package by wrapping the
velcro straps around the mattress. Put the cot in the carrying case and fasten the
zipper.
INSTRUCTIONS FOR MAINTENANCE AND CLEANING
Clean the plastic or metal parts of the product with a soft cotton cloth or sponge
moistened with water. For cleaning the changing pad follow the instructions on the
label. Do not use bleach, aggressive detergents, or abrasive products to clean the
product. All textile parts and fabrics should be washed only by hand, following the
instructions on the label (to be cleaned with a damp cloth and a mild detergent). After
cleaning, allow the cot to dry well before using it. Do not fold or remove the cot before
it is completely dry. Do not expose the product to direct sunlight for extended periods
of time and to extreme temperatures that may change colour and damage exposed
parts. Do not place objects in or on the product to avoid damaging the structure and /
or upholstery. Store the product in a clean and dry place.
Manufactured for Moni in PRC,
Manufacturer and Importer: Moni Trade Ltd.
Address: Bulgaria, Sofia, Trebich, 1 Dolo Str.,
Phone number: 003592/936 07 90, Website:
www.moni.bg
13
Publicidad
