Publicidad
Idiomas disponibles
Idiomas disponibles
III. Using Your Cubii JR2
Using the Chair Wheel Stopper
If you're using Cubii JR2 while sitting in a chair with wheels or
casters, follow the steps below:
1. Find the Wheel Stopper that is included with your JR2.
2. Lift up the back of your Cubii JR2 and place the interfacing
portion of the wheel stopper under the base plate. The nub
goes through the anchor hole.
3. Roll one wheel from your chair onto the circle of the stopper
until it is snug in place.
4. If you feel you are too close to your Cubii, the Wheel Stopper
can be detached from the base plate and positioned in the
location that is best for your needs.
Wheel Stopper
Anchor Hole
10
Publicidad
