Publicidad
Idiomas disponibles
Idiomas disponibles
•
Place the appliance on a fl at surface.
•
Remove the container from the base.
•
Remove the lid and make sure the mixer/milk frother insert is inside the container.
•
Fill the container with the recommended amount of milk, put back the lid and the
container inside the base.
Note: For better froth, use milk straight from the refrigerator (approx. 3°-5°C).
To prevent the milk from spilling after frothing, the maximum recommended amount of milk
(150ml) must not exceed the line mark MAX FROTH; this is because when frothed, milk
increases its initial volume.
•
Insert the plug in a power socket. The appliance will beep.
•
Press the button B; the other buttons go off . The milk frother will start rotating and
frothing the milk. When the required frothing is reached, the milk frother insert stops; the
appliance beeps and all the buttons light up.
Note: The cycle can be stopped in advance by pressing the button once. Do not remove the
milk container during operation.
•
When the appliance stops, remove the container from the base and pour the cold
frothed milk (Fig.2).
•
Always switch the appliance off by disconnecting it from the mains after use.
Note: It is advisable to clean the appliance of any milk residues after every use, to
avoid risks to health and prevent malfunctioning.
•
Place the appliance on a fl at surface.
•
Remove the container from the base.
•
Remove the lid and make sure the mixer/milk frother insert is inside the container.
•
Fill the container with the recommended amount of milk, put back the lid and the
container inside the base.
Note: The recommended maximum amount of milk (250ml) must not exceed the line marked
MAX MILK.
•
Insert the plug in a power socket. The appliance will beep.
•
Press the button C; the other buttons go off . The milk frother insert will start rotating
slowly. When the required temperature is reached, the milk frother insert stops; the
appliance beeps and all the buttons light up.
Note: The cycle can be stopped in advance by pressing the button once. Do not remove the
milk container during operation.
•
When the appliance stops, remove the container from the base and pour the hot milk
(Fig.2).
•
Always switch the appliance off by disconnecting it from the mains after use.
Note: It is advisable to clean the appliance of any milk residues after every use,
to avoid risks to health and prevent malfunctioning.
6
English
Frothing milk without heating it
Heating milk without frothing it
Publicidad
