MACHINE PARTS.
BATTERY CHARGE.
- Make sure the machine is turned off.
- The machine must be charged immediately when it runs out of charge.
- Never leave the battery without charge as it may break down and not charge again.
- Connect the charging cable, first the type-C to the machine and then the Usb to the adapter.
- The adapter must be 5VDC. Normally it can be worth that of your mobile phone.
- The charging time may vary depending on the amperage of the charging adapter.
- The charging indicator will be flashing while charging.
- When charging is complete, the charging indicator stays on steadily.
- Never interrupt charging once plugged in to charge as it shortens battery life.
- If you are going to spend some time without using the machine, you should charge the battery
once a month.
- Do not charge the machine while it is inside the box, as it can get hot when charging.
1. Protective cap.
2. Shaving roller.
3. Shaving head.
4. Head opening button.
5. Machine body.
6. On/Off button.
7. Operation indicator.
8. Sideburn trimmer.
9. Sideburn trimmer opening button.
10. Type-C charging connector.
11. Usb to Type-C charging cable.