TRECE CIDETRAK CMDA COMBO MESO-A Instrucciones De Montaje

MESO-
MESO- MESO-
™
™
™
POLE APPLICATOR ASSEMBLY AND DISPENSER USE INSTRUCTIONS:
MATERIALS NEEDED:
A. CIDETRAK
CMDA COMBO
®
MESO -A hanger
B. CIDETRAK
CMDA COMBO
®
MESO -A applicator
C. CIDETRAK
CMDA COMBO
®
MESO -A dispenser
DISPENSER USE INSTRUCTIONS:
1
1-2. Insert CIDETRAK
CMDA COMBO MESO-A hanger into applicator tip
®
hole on top.
6
6. When hanger is securely
attached to branch,
remove pole applicator
from hanger.
CARRIER PACK ASSEMBLY INSTRUCTIONS:
1
1. Open box at top. Fold side flaps
outward and attach strap.
™
™
™
A
CIDETRAK ® CMDA COMBO
MESO-A hanger
2
7 8
7-8. Once attached to branch and pole is
removed, hanger will automatically
reposition.
2
2. CONTENTS: 2 sets of CIDETRAK
®
CMDA COMBO MESO-A hangers
loaded on to cardboard strip,
support strap and 2 packs of
CIDETRAK CMDA COMBO MESO-A
®
dispensers.
B C
Applicator
CIDETRAK CMDA
®
COMBO MESO-A
dispenser
3
3. Attach CIDETRAK
®
CMDA COMBO MESO-A
dispensers to the hanger.
APPLICATION:
Attach dispensers
securely to lateral
branches at 10-20%
of the distance between
the trunk and branch
terminal in the upper
1/5th of the tree canopy.
3
3. Remove the cardboard strip
and the rubber band.
INSECT PHEROMONE & KAIROMONE SYSTEMS
Your Edge – And Ours – Is Knowledge.
APPLICATOR
1
ASSEMBLY
INSTRUCTIONS:
1. Attach
®
CIDETRAK
CMDA COMBO
MESO-A
Applicator Tip
to ¾" PVC pipe
4
5
4-5. Using PVC pipe attach dispensers
securely to lateral branches as
shown. Target branches 1" to 1.5"
in diameter.
4
4. Place hangers on side of box.
© 2022, Trécé Inc., Adair, OK USA • TRECE, PHEROCON and CIDETRAK are registered trademarks of Trece, Inc., Adair, OK USA • TRE-2063 • 2/22