Epomaker 680 GASKET KIT Guia De Inicio Rapido página 2

S H O R T C U T S
FN + 1 F1
FN + 2 F2
FN + 3 F3
FN + 4 F4
FN + 5 F5
FN + 6 F6
FN + 7 F7
FN + 8 F8
FN + 9 F9
FN + 0 F10
FN + - F11
FN + = F12
FN+`~ Toggle the RGB Effects
F A C T O R Y R E S E T
1. Unplug the cable of the keyboard.
2. Press the ESC and hold it.
3. Plug in the cable to connect the computer and keyboard, do NOT release the ESC key until the
cable is plugged into both computer and the keyboard.
4. Release the ESC key
5. Wait until the computer completes the setup for USB, now the keyboard won't response to the
key pressing, and a window of USB folder might pop up on the screen.
6. Eject the USB from the computer.
7. Re-plug the cable to connect the keyboard with the computer.
8. The keyboard is reset successfully when the backlights are on.
R G B S E T T I N G S
Backlight Brightness +
FN +
FN + Backlight Brightness -
Change Backlight Color
FN +
FN + Change Backlight Color
To be able to customize your key layouts, macros, and
other functions in your Epomaker 680 you can use the
VIA Software with the use of a JSON File.
Download the Software at: https://epomaker.com/products/epomaker-680-gasket-diy-kit
Instructions to install on Windows:
1. Unzip the file to find the .exe and .json files.
2. Install the .exe file in your computer.
3. Run the VIA software once installed.
4. Import the JSON file to be able to edit the Epomaker 680 settings inside VIA.
Instructions to install on macOS:
1. Unzip the file to find the .exe and .json files.
2. Unpack the .dmg file
3. Drag the VIA software to your applications folder to install it.
4. Authorize the VIA software in: System Preferences > Security & Privacy.
5. Import the JSON file to be able to edit the Epomaker 680 settings inside VIA.
P R O D U C T S P E C I F I C A T I O N S
NUMBER OF KEYS
CASE MATERIAL
HOT-SWAP
BACKLIGHT
CONNECTION
COMPATIBILITY
PRODUCT WEIGHT
PRODUCT DIMENSIONS
68 KEYS
ACRYLIC
SUPPORTS 3/5 PIN SWITCHES
RGB
USB-C
WINDOWS/MAC
550G±50G
317mm x 112mm x 17.5mm
EN