Descargar Imprimir esta página

Axor Citterio E 36413 Serie Instrucciones De Montaje / Manejo / Garantía página 2

Publicidad

T EC HN IC A L I N F ORMAT IO N
Water pressure
Recommended
Maximum
Hot water temp.
Recommended
Maximum
Flow rate
handshower
tub spout
* Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
I NSTA LL AT I O N CO N SID E R ATI ONS
⁄ For best results, Hansgrohe recommends that this unit
be installed by a licensed, professional plumber.
⁄ Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete the
installation.
⁄ This trim kit requires rough valve 15460181 (not
included).
⁄ Protection against backflow is provided by a check
valve in the handshower hose and by an automati-
cally resetting diverter.
⁄ This thermostatic mixing valve is for use with shower
heads rated at 1.1 GPM (4.2 L/min) or higher.
2
15 - 75 PSI (0.1 - 0.5 MPa)
145 PSI (1 MPa)
120°-140° F (48° - 60° C)*
158°F (70° C)*
1.75 GPM (6.6 L/min)
4.8 GPM (18.2 L/min) @ 44 PSI
E N G L I S H
⁄ This handshower is for use with automatic compen-
sating valves rated at 1.3 GPM (4.9 L/min)or less.
To guarantee the reliable function and
smooth movement of the thermostatic car-
tridge, occasionally turn the thermostat from
total hot to total cold.
⁄ Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.

Publicidad

loading

Este manual también es adecuado para:

Citterio e 36413001