Makita AN924 Manual De Instrucciones página 6

Hook
CAUTION:
Always release the trigger and
disconnect the hose before changing the hook
position.
CAUTION:
Never hook the tool at high loca-
tion or on potentially unstable surface.
CAUTION:
Do not hang the hook from the
waist belt. If the nailer accidentally drops, it may
result in misfiring and personal injuries.
3
► 1. Hook 2. Hex socket bolt 3. Hole
The hook is convenient for hanging the tool temporarily.
To change the hook position, remove the hex socket
bolt and switch the hook direction. The hook has two
holes. Choose the hole depending on your preferable
hook width.
ASSEMBLY
CAUTION:
Before carrying out any work on
the tool, always release the trigger and discon-
nect the air hose from the tool.
CAUTION:
Load the same type, size and
uniform length of nails when loading nails in the
magazine.
1
2
Loading nailer
1. Slide the pusher lever until it is locked at the mag-
azine end.
► 1. Pusher lever
2. Insert a strip of nails into the slit in the rear of the
magazine and push the strip toward the firing opening.
► 1. Strip of nails 2. Magazine
3. Press the lock lever while sliding the pusher lever
3
toward the magazine end.
► 1. Pusher lever 2. Lock lever
6 ENGLISH
1
1
2
1
2