Publicidad
Idiomas disponibles
Idiomas disponibles
T R O U B L E S H O O T I N G
Fault
The fin won't fit into
the fin box.
I keep losing my fin.
Why is it so heavy?
Water or moisture
has entered my SUP.
Inspection
The fin box has
warped and the fin
won't slot back in.
Check the fin-box for
damage and reassess
the fin attachment.
Immediate action
is required.
Solution
Heat up the plastic on the fin box with a hair-dryer,
which should allow you to squeeze the fin back in.
Leave the fin in the fin box for a few hours so that
the mould resets.
If the problem persists, please contact us at
sup-support@bluefintrading.co.uk
Additional resources may be found at www
bluefinsupboards.com/info-zone/maintenance-
repair/
The weighted fin enhances handling and
manoeuvrability, especially in more testing conditions.
Please securely attach your fin system to prevent loss
or damage.
For a replacement fin, please visit
www.bluefinsupboards.com
Remove the valve from the board entirely using the
valve tool provided. Pump air through the vacant
hole repeatedly for 20 minutes. Once complete,
lay the board flat in a cool, dry area with plenty of
ventilation for at least 24 hours.
If the problem persists, please contact us at
sup-support@bluefintrading.co.uk
Additional resources may be found at www.
bluefinsupboards.com/info-zone/maintenance-
repair/
UK
20
Publicidad
