Habitat Alix 823708 Instrucciones De Montaje página 3

EN
This manual contains important information that should be kept
for future reference.
Self-assembly.
Warning! Keep children away from the assembly area. Leave the
plastic bags out their reach. The small parts pose a choking hazard.
Dimensions
Dimensions of bed unfolded: 172 x 85 x 198 cm.
Dimensions of bed: 138 x 190 cm.
Material
Mod. A:
Bed base: electro-welded metal.
Mod. B:
Bed base: laths.
Fabric Cover: 100% polyester.
Backrest padding: expanded polyurethane foam 18,21 kg/m
Seat padding: expanded polyurethane foam 25,30 kg/m
Armrest padding: expanded polyurethane foam 21,20 kg/m
Cover of mattress: 100% polyester.
Mattress padding: expanded polyurethane foam 20 kg/m
Structure: solid poplar, particleboard.
Mechanism: steel.
Mattress thickness: 13 cm.
Assembly Instructions
Before beginning assembly, identify all components using the
manual.
In order not to lose components, do not throw the package before
completing the full assembly.
This product must be assembled by an adult.
Plan to assemble the furniture as near as possible to where you
want to install.
Assemble on a clean, flat surface.
Recommendations for use
This product was designed for indoor use only.
Do not stand on the product.
Do not sit on the armrests.
Beware of sharp objects.
Danger of pinching/squeezing when folding/unfolding.
During the first use of the convertible, remove the mattress
protective plastic to prevent the compressed air hinders the proper
functioning of the mechanism when folding the mattress. During
closing of the bed properly position the mattress whose movement
could damage the mechanism.
Do not leave pillows or duvet in bed couch position.
It is recommended to lubricate all mechanical parts to avoid the
creaking of springs, levers or joints etc ...
Maintenance
Vacuum or brush the cloth once a week. Dust accumulation
accelerates wear and the colors from fading.
Spills should be removed immediately with a clean and dry
dabbing to absorb the liquid. Do not rub, it may damage the fabric.
Variations in color between the surfaces cleaned and uncleaned
might appear.
Avoid direct and prolonged exposure of the product to sunlight. The
colors may fade.
Do not place the product near a heat source (radiator, fireplace...)
nor a moisture source. The heat and humidity can damage the
product.
Do not use abrasives.
Turn and pat the seats, backrests and armrests regularly so that
they do not wear out and do not become unevenly dirty.
Hand cleaning is recommended for the seat cushion covers.
Alix - 11/2022
If in doubt, call a professional to carry out cleaning.
BC
If you have any comments or suggestions regarding this product,
assembly instructions or service received, please enquire at your
nearest store or contact us on our website at: www.habitat-design.
com or write to this address: HABITAT, 70 AVENUE VICTOR HUGO,
93300 AUBERVILLIERS FRANCE.
.
3
.
3
.
3
.
3
The packaging elements are to be sorted out according to local
requirements. Make the right sorting choice and give them a
second life!
By sorting out this manual you contribute in preserving
the environment. This manual can still be found on
www.habitat-design.com.
2
Keep the label with lot number, it may be useful in case
of complaint.