Publicidad
Idiomas disponibles
Idiomas disponibles
Pairing mode
Connected to a device (Successfully
paired with your media device).
The headset will automatically be paired with your last successfully connected media device the next
time it is turned on.
Connection with two devices
This headset can be seamlessly connected to two different devices at once, allowing you to take calls from two
phones without switching back and forth.
Case 1: If your headset has never been paired:
1. Press and hold the power button for 2 seconds to turn on the headset.
2. Tap "BT5500" from the Bluetooth device list on Phone 1 to connect.
3. After it is successfully connected, proceed to disconnect it from the headset.
4. Tap "BT5500" from the Bluetooth device list on your Phone 2 to connect.
5. After it is successfully connected, tap the headset's name on Phone 1 again to connect. Now the
connected to both of your phones.
Case 2: If your headset has been paired with both devices:
1. Press and hold the power button for 2 seconds to turn on the headset. It will automatically be paired with
either one of your phone.
2. Tap "BT5500" from the Bluetooth device list on the other phone to connect.
Case 3: If your headset has been paired with one device, but not both:
1. Press and hold the power button for 2 seconds to turn on the headset. It will automatically be paired with
Phone 1.
2. Repeat from step 3 to step 5 in Case 1.
· To clear the Bluetooth paired device memory, ensure that the headset is powered on but not paired
with any devices. Press and hold the Power Button and the Volume Down button at the same time for 5
seconds until the LED indicator alternately flashes blue and red once.
· When pairing, please make sure to turn off the Bluetooth of other previously paired devices.
Alternately flashing red and blue
Flashing blue once every 10 seconds
Connected tone notification
EN 3
headset
is
Publicidad
