PROZIS steri+ Manual Del Usuario página 4

EN
User manual
PACKAGE CONTENTS
• 1 × Steri+ UV toothbrush sterilizer
• 1 × USB charging cable
• 1 × Wall mount
• 1 × Quick guide
PRODUCT OVERVIEW (SEE PAGE 2)
1. USB charging cable
2. Surface cover
3. UV-LED light
4. LED indicator
5. UV sterilization area
6. Toothbrush holder
Maintenance and cleaning
Cleaning
Switch the product off and remove all plugs before cleaning!
Do not use aggressive or abrasive cleaning agents or materials such as scouring milk or steel
wool to clean the appliance. These can damage its upper surface!
Protect the device from water. Only use a clean, dry cloth for cleaning the appliance and
never use any corrosive liquids. Clean the product with a soft, dry cloth.
Make sure moisture does not enter the product while cleaning to prevent damage to the
product and related repairs.
Storage
Store the product in a dry environment, protected from dust and direct sunlight.
Store your appliance inside the original case provided.
6
INSTRUCTIONS
How to use
1 2
4 5
7
06:00
1. Place a toothbrush, when dry, into the slot of the sterilizer.
2. The device will start working once the cover is closed, and the white indicator light will
switch on. The device will switch off after one minute.
3. The indicator light will switch to red when the battery is low.
4. The red indicator light will flash while the device is being charged. The indicator light will
switch off once fully charged.
5. Remove the sterilizer from the holding plate to charge the battery.
6. The device takes about 1.5 h to be fully charged and the battery can last for up to 1 month.
7. Once the device has been used, and if the cover remains closed, it will start working
automatically every 6 hours.
EN
3
6
01:50
7