WorkPro W125018A Manual De Instrucciones Original página 5


Disconnect the plug from the power source
and/or remove the battery pack, if detachable,
from the power tool before making any adjust-
ments, changing accessories, or storing power
tools. Such preventive safety measures reduce the
risk of starting the power tool accidentally.

Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are danger-
ous in the hands of untrained users.

Maintain power tools and accessories. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition that
may affect the power tool's operation. If
damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained
power tools.

Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.

Use the power tool, accessories and tool bits
etc. in accordance with these instructions, taking
into account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.

Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
5) Service

Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
2. Layout and Unpacking
2.1 Layout (Fig. 1+3)
1. ON/OFF switch
2. Locking knob
3. Saw blade
4. Soleplate
5. Blade holder
2.2 Unpacking
Your reciprocating saw has been shipped completely
assembled. Carefully remove the tool and accessories
from the box. Make sure that all items listed in the
packing list are included. Inspect the tool carefully to
make sure no breakage or damage occurred during
shipping. Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
GB
This package contains:

Reciprocating saw

Metal cutting blade x 2pc

Wood cutting blade x 2pc

Operation Manual
Check for damage to the tool, parts or accessories
which may have occurred during transport. Take the
time to thoroughly read and understand this manual
prior to operation.
Danger!
The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils
or small parts. There is a danger of swallowing or
suffocating!
3. Proper use
The multi-saw is designed for sawing wood, iron,
non-ferrous metals and plastic. It should only be used
with the appropriate saw blade.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the machine is used in
commercial, trade or industrial businesses or for
equivalent purposes.
4. Technical data
Mains voltage
Power
Stroke rate
Stroke height
Cutting depth in wood
Cutting depth in iron
Protection class
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 62841.
L sound pressure level
pA
K uncertainty
pA
L sound power level
WA
K uncertainty
WA
5
220-240 V~ 50 Hz
710W
-1
0-2800 min
20 mm
115 mm
4 mm
II /
82.8 dB(A)
5 dB
93.8 dB(A)
5 dB