Publicidad
Idiomas disponibles
Idiomas disponibles
B2 = ON/OFF button hotplate 1
D1-D2 = + button
E1-E2 = - button
F = Cooking zone display
- The stove top is switched on via the (A) button. The two
displays will indicate a 0 position, indicating that the
cooking area may be switched on. If no other operation is
carried out within 10 seconds from this moment, the stove
top will turn off automatically.
- To switch the appropriate area on, press the relevant
button (D1 or D2). Said area will turn on in the 9 position
and at the same time a decimal value will be displayed (F)
indicating that the rapid pre-heating function has been
activated. By pressing the required button (E1 or E2) the
area will turn on in the 4 position.
- To turn off any single area press the related B button.
The display will indicate a 0 position. To switch off the stove
top press the (A) button. If, however, the temperature of
the area to be turned off exceeds 50°C, the letter (H) will
be displayed until the cooling down process has been
completed.
N.B.: the stove top is equipped with safety devices. When
more than one button is activated contemporarily, or when
one button is activated erroneously for a period longer than
15 seconds, the stove top will automatically turn off and
the letter (F) will be displayed.
Operation (fig.6-7)
A = ON/OFF button
B = Lock button
C = ON/OFF indicator light lock button
D1-D2 = + button
E1-E2 = - button
F = Cooking zone display
G = Timer Display
H = Timer buttons (+ / -)
I = Rapid heating function (Heat up) active
- On first switching on, or if the hob is disconnected from
the mains, it is in safety mode, i.e. indicator light C is on.
To use the hob, press and hold button B for 3 seconds,
until indicator light C goes out.
A beep indicates that the function has been deactivated.
- If button A is selected, the hob switches on. A zero
appears on all the displays for 10 seconds.
If no further action is taken within this space of time, the
hob switches off again.
A hotplate may be switched on by selecting "+" buttons D1
or D2 or "-" buttons E1 or E2 within 10 seconds.
If "+" button D1 or D2 is pressed and held, the display
shows minimum power level 1. If "-" button E1 or E2 is
used, the display shows maximum power level 9. This
process can be used to select the temperature adjustment
of the heating zone(s).
A cooking zone can be switched off by bringing the power
level to "0" with button E1 or E2, or by pressing and holding
the "+" button (D1/D2) and the "-" button (E1/E2)
simultaneously.
- To switch the hob off, press button A.
- When an object is placed on the controls, the stove top
will automatically switch to the OFF position.
- When a hotplate is switched to the OFF position and the
surface temperature exceeds 50°C, a luminous "H"
indication light will switch on, visible on the display beside
the selection button This will remain lit until the cooling
process is complete.
- The B function blocks the stove top from the moment of
selection.
- To activate or deactivate this, hold a finger over the B
sensor for approximately two seconds.
- Operating mode is activated when the C indicating light
is lit.
- Pressing the button A the hob will be switched off withaut
switching off the safety lock.
For switching on again the hob, deactivate the safety lock
pressing the button C.
Heat up (Rapid heating)
The Heat up function can be used to set the cooking zone
to its maximum temperature for a specified period of time,
after which the temperature will return to a lower value
selected previously.
To activate the Heat up function, select the hotplate by
pressing the + button until setting 9 is displayed; if the
button is pressed again a decimal point "•" or the letter
"A" will appear on the display (next to the digit 9) for 5
seconds. This means the Heat up function is active.
The desired power level (between 1 and 8) should be
selected within 5 seconds. If power level 9 is selected, the
function is disabled. To deactivate the Heat up function,
simply select the + button and hold it down until setting 9
is reached and the decimal point disappears from the
display. When the "Heat up" function is active, the
previously selected temperature level may be increased
by pressing the (+) button. Once the cooking zone has
reached the selected temperature, the "Heat up" function
is automatically deactivated and the hob emits a BEEP.
The cooking zone will operate in a constant manner, at
the set power level.
Timer
Depending on the model of the hob, it may be equipped
with a TIMER function.
This function can be used to set an amount of time
(between 00 and 99 minutes) after which the selected
cooking zone will switch off automatically.
Operation
:
- Press the + or - button corresponding to function H. 00
will appear on the timer display.
Use the H "+" and "-" buttons to set the desired timer period.
- To activate the timer rapid setting mode, press button H
"+" or "-" for at least 2 seconds.
- Select a cooking zone and set the desired temperature
level (between 1 and 9) using the "+" button (D1) or "-"
button (E1).
- While the timer is in operation, the hotplate display shows
the symbol
flashing at the power level which has been
set (e.g. 4).
Warning: if the symbol
the timer has not been activated. Repeat the operation.
- The power level of the plate can be altered even with the
timer function active, by pressing the "+" button (D1) or
the "-" button (E1).
- At the end of the programmed time, the hotplate will
switch off. This will be indicated by indicator light G on the
display flashing and by a beep lasting for about 2 minutes.
To stop the beep, press either of the setting buttons (+ or
-) for the timer H or the hotplate D1 or E1.
- If you wish to stop the TIMER function before the set
time has elapsed, press the + and - ( H) buttons
simultaneously for at least 2 seconds.
THE MANUFACTURER DECLINES ALL RESPONSIBILITY
FOR EVENTUAL DAMAGES CAUSED BY BREACHING
THE ABOVE WARNINGS.
- 14 -
remains constant, it means that
Publicidad
