Jolly line Easy Decoder Manual página 3

UK - Manual
Learning from original remote
control
With this function it is possible to
acquire on the
buttons the functions from the
original remote control.
1. Press simultaneously and
keys and release them. The
led starts blinking.
2. Place the two remote controls
facing each other and keep
the key of the remote control to
be duplicated pressed. The led
light of EasyDecoder turns off.
3. Release the key of the
original remote control. The
led light of EasyDecoder turns
on steadily (if it does not turn
steadily, repeat the procedure
starting from step 1).
4. Press the key of EasyDecoder
you want to apply the acquired
function to. The led light of the
EasyDecoder resumes blinking
indicating that the remote
control is ready to store the
next key.
5. Repeat the procedure
starting from step 2 to acquire
all remaining keys.
If you want to exit the learning
mode, please wait 20 seconds
until the led light stops blinking.
Delete the acquired key
1. Press simultaneously and
keys and release them. The
led starts blinking.
2. Press the button that want
restore to the factory data, the
led will flash for a long time.
3. Repeat the before point to
restore the remaining keys.
If you want to exit, wait 20
seconds until the led light stops
blinking.